Bedroom lit by recessed LED lights installed by Astral
Recessed lighting, installed

The room you love, finally lit right.

Clean, warm LED recessed lights from $180 per light, installed, with wiring and dimmer included. Pick your lights, pay online, and our licensed team installs.

Licensed C-10 #1114918Fully insuredDimmer included1-year workmanship warranty

Choose your lights. See your price.

Every price is per light, installed. Mix styles and sizes, pay online, and we call you to book your date.

Choose your recessed lights
4 selected

Every recessed light is installed and includes the LED fixture, all wiring and dimmer switch control.

4" Slim LED wafer
Clean, ultra-thin look. Our most popular.
$180.00 each, installed
6" Slim LED wafer
Wider light spread for larger rooms.
$190.00 each, installed
4" Bevel trim
Deep-set, adjustable spotlight with a beveled trim.
$220.00 each, installed
Quick check

A few quick answers so your price is right before you pay.

Is there an existing ceiling light controlled by a wall switch in each room?
Are the ceilings drywall?
Are those ceilings 10 ft or lower?
Is there attic access above those rooms?
Your order
  • 4 × 4" Slim LED wafer, installed$720.00
Total$720.00

City permit fee, if any, billed at cost with the receipt.

By entering your phone number, you agree that Astral Electrical Contractor may call and text you (SMS) at this number about your order, scheduling and service, including messages from an automated or virtual assistant. Message frequency varies. Msg & data rates may apply. Reply STOP to cancel, HELP for help. Consent is not a condition of purchase. See Terms & Privacy.

Secure checkout by Stripe. Card or bank.

Everything in one price

The LED light

Slim, energy-efficient fixtures with a clean, modern finish.

All the wiring

Run from your existing lighting circuit, neat and to code.

Dimmer control

Set the mood from bright and crisp to warm and low.

Licensed & insured

C-10 #1114918, permit handled, one-year workmanship warranty.

Real Astral installs

Homes in the Bay Area, lit by our own team.

LED recessed lighting installed in a Bay Area bedroom by Astral ElectricalWarm LED recessed lights installed in a Bay Area home ceiling by Astral Electrical

Why Bay Area Homeowners Are Switching to Recessed LED Lighting

Recessed lighting is the fastest way to make a room look bigger, brighter and more modern without touching a single wall. The fixtures sit flush with the ceiling, so there are no bulky lamps or dated fixtures hanging down. Just clean, even light from corner to corner.

Modern LED recessed lights also cut what it costs to light your home. They use a fraction of the energy of incandescent and halogen bulbs and are built to last for years, so you are not on a ladder every few months changing bulbs.

What you get

  • Brighter, more even light with no dark corners
  • Lower energy use than incandescent and halogen lighting
  • Long-life LEDs, with no bulb changes for years
  • A clean, modern ceiling that lifts the look of your home
  • A dimmer included, so every room works for both bright tasks and a relaxed evening

The Recessed Lights We Install

4" Slim LED Wafer (most popular) — $180 per light, installed

An ultra-thin, canless LED fixture that mounts directly in the drywall, with no metal can housing. Its small, clean opening makes it the go-to choice for existing homes, and it fits most rooms: bedrooms, hallways, kitchens and living rooms.

6" Slim LED Wafer — $190 per light, installed

The same canless design with a wider light spread. Ideal for larger rooms, family rooms and higher ceilings where you want to cover more area with fewer fixtures.

4" Bevel Trim (adjustable) — $220 per light, installed

An adjustable spotlight you can aim at artwork, a fireplace, an accent wall or a kitchen island. Available in black, white and brushed nickel.

You can mix styles and sizes in the same order. For example, 6" wafers for general light and bevel trims to highlight a feature wall.

Which Light Works Best in Each Room

Kitchen

Bright, even light over counters, the island and the sink. Most kitchens use 4" or 6" wafers on a dimmer, with bevel trims to highlight the island.

Living Room and Family Room

An even layout of 6" wafers lights the whole room. Add bevel trims to accent artwork or a fireplace.

Bedrooms

4" wafers on a dimmer for a calm, comfortable room.

Hallways and Stairs

Evenly spaced 4" wafers for safe, shadow-free walkways.

Home Office

Clear, even light that reduces eye strain during long workdays.

Types of LED Lighting for Your Home's Interior

Recessed lights are just one part of a well-lit home. These are the main types of interior LED lighting and where each one works best:

Recessed LED Lights

Flush-mounted ceiling lights that give clean, even general lighting. The most popular upgrade for living rooms, kitchens, bedrooms and hallways.

Under-Cabinet LED Lighting

Slim LED strips or puck lights mounted under kitchen cabinets. They put bright task light right on the countertop, where recessed lights from above can leave shadows.

LED Strip and Cove Lighting

Flexible LED strips hidden in ceiling coves, behind TVs, under floating vanities or along toe kicks. They add soft, indirect light and a high-end look.

LED Pendants and Chandeliers

Decorative fixtures that hang over a kitchen island, dining table or entryway. They add style and focused light.

LED Flush-Mount and Ceiling Fixtures

Surface-mounted fixtures for rooms where recessed lights are not practical, such as closets, laundry rooms and garages.

LED Wall Sconces and Vanity Lights

Wall-mounted fixtures for bathrooms, hallways and bedrooms. Vanity lights give even, shadow-free light at the mirror.

Interested in any of these besides recessed lights? Call us at (650) 562-8594 for a quote.

Types of LED Lighting for Your Home's Exterior

Recessed Soffit and Eave Lights

Wet-rated recessed lights installed under the roof overhang. They light up the outside of your home, the walkways and the entrances, and give your house a clean, upscale look at night.

LED Flood and Security Lights

Bright fixtures, often with motion sensors, for driveways, side yards and backyards. They improve security and visibility at night.

LED Landscape and Path Lighting

Low-voltage lights that highlight trees, gardens and walkways, and make paths safer after dark.

LED Wall Lights and Porch Lights

Wall-mounted fixtures by the front door, the garage and the patio doors.

Patio and Deck Lighting

String lights, step lights and recessed deck lights for outdoor living spaces.

Every outdoor fixture must be rated for wet or damp locations. We install only fixtures rated for where they go.

Useful Information Before You Install LED Lighting

Lumens, Not Watts

With LED, brightness is measured in lumens, not watts. A typical 4" recessed LED produces about the same light as an old 60-watt bulb while using a fraction of the energy. Compare lumens when you compare lights.

Color Temperature (Kelvin)

  • 2700K, warm white: cozy, like a traditional bulb. Great for bedrooms and living rooms.
  • 3000K, soft white: the most popular choice for whole-home lighting.
  • 3500K–4000K, neutral white: crisp light for kitchens and offices.
  • 5000K, daylight: very bright and cool. Best for garages and work areas.

Color Rendering (CRI)

CRI measures how true colors look under a light, on a scale up to 100. A CRI of 90 or higher makes skin tones, food and finishes look natural, which is especially important in kitchens and bathrooms.

Dimmers and Compatibility

Not every dimmer works well with LED. An LED-compatible dimmer prevents flickering and buzzing. That is why we include one with every order.

IC-Rated and Airtight Fixtures

Fixtures that touch attic insulation must be IC-rated (insulation contact) and airtight. That keeps the installation safe and stops heated or cooled air from leaking into the attic.

Lifespan

Quality LED fixtures are rated for tens of thousands of hours. With normal use, that means many years without changing a bulb.

Advantages of Installing LED Lighting in Your Home

  • Lower energy use: LEDs use far less electricity than incandescent and halogen lighting, which helps lower your utility bill.
  • Long life: years of use without replacing bulbs.
  • Less heat: LEDs run much cooler than old bulbs, so your rooms stay more comfortable in summer.
  • Better light quality: even, flicker-free light with natural colors.
  • Instant on: full brightness the moment you flip the switch.
  • Full dimming control: set the right mood for every moment.
  • Better for the environment: less energy used, no mercury, and fewer bulbs thrown away.
  • A more valuable home: modern lighting is one of the upgrades buyers notice first.

How Many Recessed Lights Do You Need?

A simple rule of thumb: space the fixtures roughly half the ceiling height apart. On a standard 8-foot ceiling, that is about 4 feet between lights, with about 2 feet from the walls. As a general guide:

  • Small bedroom or office: 4 to 6 lights
  • Medium bedroom: 6 to 8 lights
  • Kitchen: 6 to 10 lights, depending on the layout
  • Living room or family room: 6 to 12 lights

Not sure? Choose your best estimate in the selector and we will confirm the layout with you before installation.

What Affects the Price

Your price per light is shown in the selector above and covers a basic installation. These factors can change the scope of a job:

  • Ceiling access: rooms with an accessible attic are the most straightforward. Second-story or closed ceilings can take more time.
  • Ceiling height and type: vaulted, sloped or very high ceilings need more time and equipment.
  • New circuits or switch locations: adding a new circuit or moving switches goes beyond a basic installation.
  • Electrical panel: an older or full electrical panel may need an upgrade before new lighting can be safely added.
  • Permits: where your city requires a permit, we handle it, and the city fee is billed at cost with your receipt.

California Code and Title 24, Handled for You

California's Title 24 energy code sets the rules for new lighting in homes, including high-efficiency fixtures and, in many cases, dimming controls. Fixtures installed in an insulated ceiling must also be rated for insulation contact (IC-rated) and be airtight. We install code-compliant fixtures and take care of the permit and inspection where they are required, so your lighting is done right the first time.

Why Homeowners Choose Astral Electrical

  • Licensed California electrical contractor: C-10 License #1114918
  • Fully insured
  • One-year workmanship warranty
  • Over ten years of field experience
  • Upfront, per-light pricing: see your price and pay online, with no surprises
  • A dimmer included with every order
  • Bilingual team: English and Spanish

Recessed Lighting Installation Across the Bay Area

We install recessed lighting in homes throughout the Bay Area, including San Jose, Santa Clara, Sunnyvale, Mountain View, Palo Alto, Los Altos, Cupertino, Campbell, Los Gatos, Saratoga, Milpitas, Fremont, Newark, Union City, Hayward, San Leandro, Oakland, Berkeley, San Mateo, Redwood City, San Francisco, Walnut Creek, Pleasanton, Dublin and Livermore.

How it works

1
Choose & pay

Pick your lights and quantities and pay securely online.

2
We book your date

We call you to schedule a time that works for you.

3
Lights on

Clean install, tested, dimmer set. Usually one visit.

Questions

What does the price include?▾

Each light is installed: the LED fixture, all wiring from your existing lighting circuit, and dimmer switch control. Licensed C-10 work, done to code, fully insured, with a one-year workmanship warranty.

When do you install?▾

Once your order is paid we call you to book your installation date. Most homes are done in a single visit.

What counts as a basic installation?▾

Standard drywall ceilings with attic or joist access, fed from an existing lighting circuit. No-access ceilings, plaster, ceilings over 10 ft, or a new circuit are quoted separately after a quick look, before any work starts.

Is a permit needed?▾

We handle the permit when your city requires one. The city's fee, if any, is billed separately at actual cost with the receipt.

Can I mix styles and sizes?▾

Yes. Choose any mix of styles, sizes and finishes. Each type is priced per light, installed.

How much does recessed lighting installation cost in the Bay Area?▾

At Astral Electrical, LED recessed lights start at $180 per light installed, with wiring and a dimmer included, for a basic installation. Choose your fixtures and quantity above to see your exact price.

What is a canless recessed light?▾

A canless (wafer) light is an ultra-thin LED fixture that mounts directly in the drywall without a metal can housing. It is easier to install in existing homes and very energy efficient.

Can you install recessed lights without attic access?▾

In many homes, yes. Canless wafer lights are designed for existing ceilings and can often be installed from below. If your ceiling needs extra work, we will let you know before we start.

How many recessed lights do I need?▾

A common rule is to space lights about half the ceiling height apart. On an 8-foot ceiling, that is roughly 4 feet apart. Most bedrooms use 4 to 8 lights and most kitchens and living rooms use 6 to 12. We confirm the layout before installation.

Can recessed lights be put on a dimmer?▾

Yes. A dimmer is included with every order, and we use LED-compatible dimmers so your lights dim smoothly without flickering or buzzing.

Are LED recessed lights energy efficient?▾

Yes. LED recessed lights use far less energy than incandescent or halogen bulbs and last many years longer, which lowers both your energy use and your maintenance.

Can I replace my old can lights with LED?▾

Yes. We can replace old can lights with new canless LED wafers or adjustable trims for a cleaner, more modern look.

What does Title 24 mean for my recessed lights?▾

California's Title 24 energy code requires high-efficiency lighting and, in many cases, dimming controls. Fixtures in insulated ceilings must be IC-rated and airtight. Every fixture we install meets these requirements.