Serving Santa Clara, CA · Santa Clara County

Whole-Home Surge Protection in Santa Clara, CA

One surge — from the grid, a nearby strike, or your own big motors — can wipe out your electronics, EV charger, heat pump and smart panel. A whole-home surge protective device (SPD) at the panel is now NEC 230.67 code on service upgrades, and cheap insurance for an electrified home.

  • Panel-mounted SPD (Type 1 or Type 2)
  • Required by NEC 230.67 on new/upgraded services
  • Protects EV charger, heat pump, solar & electronics
  • Layered with point-of-use protection
  • Installed and tested by a licensed C-10

Licensed C-10 · CSLB #1114918 · Permitted & inspected

Virtual assessment

Free surge protection quote in Santa Clara

Ana
Customer service
Ana, Astral Electrical

No obligation. Licensed C-10. Usually a reply within hours.

Hi, I'm Ana. I'll get you an exact price, our estimator prices it remotely, no truck needed. First, what should I call you?

Free estimate · No obligation · By continuing you agree to be contacted about your request.

Certified installer & trusted partners

Tesla Certified InstallerSPAN Certified InstallerChargePoint InstallerAutel InstallerButterflyMX Certified InstallerGenerac Authorized DealerQmerit / AMP InstallerBright Saver Referral Partner

Whole-Home Surge Protection in Santa Clara, done right

Every job in Santa Clara starts with a free assessment and your home's Electrical Score, is sized by a real NEC load calculation, and is permitted and inspected in Santa Clara County. No guesswork, no cutting corners.

Panel-mounted SPD (Type 1 or Type 2)

Required by NEC 230.67 on new/upgraded services

Protects EV charger, heat pump, solar & electronics

Layered with point-of-use protection

Installed and tested by a licensed C-10

What does surge protection cost in Santa Clara?

Full cost guide →

A whole-home SPD installed on its own in our area typically runs $350–$650 — a fraction of what one surge can destroy.

Whole-home SPD (Type 2) installed at the panel$300 – $700
Type 1 SPD or panel needs space/breaker work$500 – $1,000
Added during a panel upgrade or EV/solar joboften a small add

Typical range for the Santa Clara County area, not a quote. Your exact price comes from a free assessment.

Permits & your utility in Santa Clara

In Santa Clara, electric service is Silicon Valley Power (City of Santa Clara) (SVP), and building permits are issued by City of Santa Clara. We pull the permit on every surge protection, coordinate the service and meter to SVP's SVP Rules & Regulations + 'Residential Electrical Service Upgrades' guide, and pass inspection, so it's safe, legal, and protects your home's value.

Not sure what your Santa Clara home needs?

Start with your home's Electrical Score: a licensed C-10 electrician grades your panel, service and wiring 0 to 100 for safety and capacity. Know before you buy an EV, add solar, or sell.

surge protection in Santa Clara: FAQ

Do I really need whole-home surge protection in Santa Clara?+

If you've added — or plan to add — an EV charger, heat pump, solar, or a smart panel, yes. Those are exactly the loads a surge destroys, and NEC 230.67 now requires an SPD on new and upgraded services. It's a small add that protects thousands in equipment.

Isn't a power strip enough?+

No. A plug-in strip only protects what's plugged into it, and not from the biggest surges coming in on your service. A panel-mounted SPD clamps the surge at the source, protecting your whole home — hardwired loads included. We often layer both.

Whole-Home Surge Protection in Santa Clara?

Book your free assessment with a licensed C-10 electrician today.

CallTextFree assessment
Surge protection in Santa Clara, CA — Licensed C-10