How much does electrical repair cost?
Repair pricing is mostly about diagnosis — finding the real cause — then the fix. Here are honest ranges for the repairs we do most, in our area.
We're Astral — a licensed C-10 electrical contractor (CSLB #1114918). Honest ranges, permit included, your exact number from a free assessment.
Typical cost in our area
Most common repairs in our area run $150–$500 once diagnosed — you get a firm price before we fix anything.
| What you're getting | Typical range |
|---|---|
| Diagnostic / troubleshooting visitoften credited toward the repair if you proceed | $125 – $250 |
| Replace an outlet, switch or GFCI | $150 – $400 |
| Replace a failed breaker | $150 – $350 |
| Find & fix a dead circuit | $200 – $650 |
| Repair a loose / hot connection at the panel | $250 – $800 |
| Bigger issue → panel upgradeif the panel itself is failing | see the panel guide |
These are typical ranges for our service area, not a quote. Every home is different — the real number comes from a free on-site assessment and a NEC load calculation by a licensed C-10. We never promise a price online we can't stand behind.
Beware the '$49 service call' bait — it usually buys a quick look, then an upsell. We charge an honest diagnostic that goes toward the repair, and we quote the fix before we touch it. A hot panel or burning smell is not a wait-and-see — call a licensed C-10 right away.
What moves the price
What a done-right price includes
The cheapest number online usually leaves this out. Ours doesn't.
- A real diagnosis — we find the root cause, not just the symptom
- A firm price before we do the repair (no open-ended clock)
- The fix, tested and verified to code by a licensed C-10
- A written diagnostic note of what was wrong and what we did
- 1-year workmanship warranty on the repair
Certified installer & trusted partners
Questions, answered straight
Do you charge just to come out?+
There's an honest diagnostic fee to find the real cause — and it's typically credited toward the repair if you move forward. You'll always get a firm price before we do any work.
My breaker keeps tripping — is that a cheap fix?+
Sometimes it's a $150 GFCI or breaker; sometimes it's a sign your service is overloaded and needs an upgrade. We diagnose which it is and show you honestly — a reset without finding the cause just delays the problem.
Is a burning smell or hot panel urgent?+
Yes. Turn off the circuit if you safely can and call us right away — it points to a loose or failing connection that can start a fire.
Get your exact number — free.
A licensed C-10 comes out, runs the load calc, and gives you a clear, upfront price for your home. No obligation.
More cost guides
electrical panel upgrade cost
standard 100A→200A service upgrade in our area…
EV charger installation cost
home EV charger installs in our area land around $1,500–$3,0…
Tesla Powerwall cost installed
single Powerwall 3, installed to code with the gateway and n…
whole-house rewiring cost
whole-house rewires in our area land between $18,000 and $35…
standby generator cost installed
whole-home Generac standby installs in our area land around …
hot tub / spa wiring cost
hot tub / spa installs in our area land around $1,200–$2,500…
whole-home surge protection cost
whole-home SPD installed on its own in our area typically ru…