How much does EV charger installation cost?
The price of a home EV charger is mostly about the run and your panel — not the charger. Here's what a done-right, permitted Level 2 install really costs in our area.
We're Astral — a licensed C-10 electrical contractor (CSLB #1114918). Honest ranges, permit included, your exact number from a free assessment.
Typical cost in our area
Most home EV charger installs in our area land around $1,500–$3,000, permitted, on a dedicated circuit.
| What you're getting | Typical range |
|---|---|
| Simple install — charger near the panel, capacity available | $1,200 – $2,000 |
| Typical install — dedicated 60A circuit, medium run | $1,500 – $3,000 |
| Long run / conduit / detached garage / trenching | $3,000 – $6,000 |
| Panel too tight → 200A upgrade firstsee the panel-upgrade guide | add $6,500 – $9,500 |
These are typical ranges for our service area, not a quote. Every home is different — the real number comes from a free on-site assessment and a NEC load calculation by a licensed C-10. We never promise a price online we can't stand behind.
A charger bolted on without a load calc is how you get nuisance trips or an unsafe circuit. We size the circuit for real, permit it, and if your panel is tight we show you exactly why — no surprise upsell mid-job.
What moves the price
What a done-right price includes
The cheapest number online usually leaves this out. Ours doesn't.
- A dedicated 60A circuit sized to NEC 625 (48A × 125% continuous)
- Load calc to confirm your panel can carry it
- Tesla-certified install — Universal Wall Connector or any J1772/NACS
- Permit + inspection
- 1-year workmanship warranty
Certified installer & trusted partners
Questions, answered straight
Does the charger price include the unit?+
The ranges above are for installation. If you want us to supply the charger (e.g., a Tesla Universal Wall Connector), we add it at cost + install — or you provide your own. Either way it's a Tesla-certified, permitted install.
Why did another quote come in at $400?+
A $400 'install' is usually a charger plugged into an existing outlet or a short surface run with no permit or load calc. That can be unsafe and can trip. Our range reflects a dedicated, correctly-sized, permitted circuit.
Get your exact number — free.
A licensed C-10 comes out, runs the load calc, and gives you a clear, upfront price for your home. No obligation.
More cost guides
electrical panel upgrade cost
standard 100A→200A service upgrade in our area…
Tesla Powerwall cost installed
single Powerwall 3, installed to code with the gateway and n…
whole-house rewiring cost
whole-house rewires in our area land between $18,000 and $35…
standby generator cost installed
whole-home Generac standby installs in our area land around …
electrical repair cost
common repairs in our area run $150–$500 once diagnosed…
hot tub / spa wiring cost
hot tub / spa installs in our area land around $1,200–$2,500…
whole-home surge protection cost
whole-home SPD installed on its own in our area typically ru…